A cast pinching tool with an angled nose for holding or manipulating materials, ideal for small objects or tight spaces.

A cast pinching tool for holding or manipulating materials.

Replaceable bypassing cutting blades crafted from 154CM, meant for cutting regular and light-gauge wire. 154CM will keep its edge three times as long as traditional stainless steel for less down-time in the field.

Replaceable bypassing cutting blades crafted from 154CM, meant for cutting hard wire. 154CM will keep its edge three times as long as traditional stainless steel for less down-time in the field.

Concave cutters located under plier jaws for use on Stranded wire - smaller gauge wire bundled or wrapped together to form a larger conductor. The concave shape helps to keep the shape of the strands without crushing them.

Found in the jaw of the tool and used for general purpose crimping of electrical connectors.

A knife made from 420HC stainless steel with a half straight and half serrated edge. This style of blade gives the user a choice of precise cuts using the plain section, or cutting through fiber and rougher material using the serrated area.

A toothed tool made from 420HC stainless steel that is designed to work on a pull motion, which requires less effort and has less propensity for breakage. The open-tooth design keeps the saw from filling up with material, allowing the user to complete a job without pausing to clean the tool.

A replaceable v-notch cutter ideal for cutting through straps, seatbelts, canvas, and other fabric-based materials.

This hammer can be used for pounding a tent stake, striking a nail, or other uses. It features a textured end to reduce contact slippage.

This tool allows the user to manually eject a jammed round in an AR-15 platform rifle by removing the magazine, placing this stainless steel hook into the ejection port, and pulling back sharply. For use when the charging handle has been rendered dysfunctional.

A replaceable bronze tool for removing carbon buildup from the bolt tail and bolt carrier of a firearm. Bronze is used because it is softer than steel and won't cause damage to the bolt carrier group parts while scraping.

A cleaning rod and brush adaptor for the male end of firearm cleaning kits with an 8mm diameter and 32 threads-per-inch.

A thin, replaceable punch that threads onto a multi-tool, allowing the user to punch out the pins on and disassemble a firearm.

This tool features a one way gate and allows for easy clipping to a belt loop or strap. It can also be used to pop the top on a favorite beverage.

This driver slot holds any of the full-size Leatherman tool bits in place and allows the user to exchange bits for different jobs. Not intended for the eyeglass screwdriver tip.